OFF CENTER REACH FOR CONVENTIONAL & HYDRAULIC CRANES v0.1
COMPANY:
PROJECT:
CRANE MAKE AND MODEL:
Meters
Feet
Distance, Centerline of rotation to boom foot pins, enter negative value for hydraulic cranes
Distance from bottom of tracks or tires to boom foot pins
Boom, centerline to bottom
Boom width
Boom tip Sheave offset
Clearance between the side of the boom and the structure
Clearance between the bottom of the boom and the structure
Jib Depth
Jib Length
Jib Offset, degrees TIP: Change jib offset to increase/decrease boom length
Structure height
Distance from the structure to centerline of rotation
Depth of the structure
Off center width
OUTPUT FOR BOOM ONLY:
Reach across the structure for the boom
Diagonal distance from structure to the centerline of rotation
Operating Radius of the boom. This is the same operating radius as the jib
Boom angle, degrees
Boom length required
Distance above the structure to boom tip sheaves
OUTPUT FOR BOOM IN COMBINATION WITH A JIB:
Boom length required
Reach across the structure for the boom
Distance above the structure to the boom tip sheaves
Operating radius of the boom
OUTPUT FOR THE JIB:
Reach of the jib
Jib angle with the horizontal, degrees
Distance Above the structure to the Jib tip sheave
Clearance between bottom of jib and structure
Operating Radius of the Jib
Note: